Start by sorting on the driveway
Most of what comes off a house falls into a few piles. Asphalt shingles and felt are the bulk of it and are bagged or loaded for the landfill side of the transfer station. Wood, metal and vinyl are different, because they can often be pulled out and recycled instead.
Sorting early saves time at the scale house, and it keeps clean material from being mixed with trash. We lay tarps, separate piles as the crew works and sweep the yard with a magnet at the end of each day.
One local destination for most of it
The Centre County Recycling and Refuse Authority runs the transfer station near Bellefonte, and it is where most county disposal ends up. Its page on wood recycling lists what it takes: clean, untreated wood and timber, pallets and brush. Painted, stained or treated lumber is not accepted for recycling, and neither are railroad ties or furniture.
That matters on a roof job. Fresh offcuts of plain plywood or framing lumber are one thing; weathered, painted fascia or treated deck boards are another, and they belong with the regular waste. The Centre Region Council of Governments also notes that residents can self-haul home construction debris such as decking, sheds and cabinets to that transfer station, which is the route for roofing waste too. Check the posted list before you load the truck.
Siding and metal have their own streams
If you are replacing siding at the same time, the authority has a separate vinyl siding page. It accepts siding, corner posts and J channel, but not shutters or siding with insulation attached. Pulling the foam-backed panels apart from the plain ones beforehand is worth the extra few minutes.
Gutters, flashing and other scrap metal are usually worth keeping out of the dumpster too. The authority's scrap metal and appliances page explains how metal and white goods are handled at the transfer station, including what residents can bring.
Salvage, donation and reuse
Not everything that comes off a house is waste. Whole sheets of decent plywood, unopened bundles of shingles left over from a job, intact windows and clean lumber can often find a second use through a neighbour, a church workshop or a local building-materials reuse store.
We always return unopened leftover material to the supplier when we can, and we tell you what remains after a job so you can decide what to do with it.
Around Bellefonte, Boalsburg and Port Matilda
Homeowners from Bellefonte, Boalsburg, Pleasant Gap and Port Matilda are all within a reasonable drive of the transfer station. If you are hauling your own load, cover it, secure it and give yourself time for a weighing stop. If you would rather not haul at all, tell us at the estimate and we will include the cleanup and haul-off in the plan.
